CAPPS - NC
NC Programming
- Run CMM Style Part Measurement on Machine Tools up to 5 Axis by programming from CAD models offline
- Collision Avoidancefor all CAD and Probe elements in Graphics to prevent probe crashes
- Automatic path Generation and calculation of all 2D and 3D features including sphere, cylinder, circle, slot, Taurus and cone
- Graphically simulateprograms before post processing
- Automatic indexingof 4th and 5th axis for feature vectors
.jpg)
Reporting
- Generate complete inspection reports as part is being measured
- Use built in SPC to perform statistics or feed data to other SPC programs
- Graphical template reports show elements in 3D view directly at the feature
- Connect directly to upload data to machine and display results in real time
 |
Advanced Alignments
- Use advanced alignment macros to align your data or send a work offset back to the CNC
- Advanced Alignments include 3-2-1, MGP (Tooling Balls), and Best Fit
Reduce Scrap & Rework
- Verify Parts before the scrap is created
- Reduce part manufacturing and verification cycle times
- No need to remove part to send to CMM for part measurement
In-process Feedback
- Calculate any measurement parameter and update variables on CNC
- Calculate work offsets, 5 axis table positions and update on the machine by feedback
- Observe and correct for tool wear and tear, automatically feedback to machine
- Use profile measurements to measure tool deflection write compensation directly to the CNC
Data Transmission
Options
- Capps-NC Geometric – 2D Features:Program and measure prismatic parts with 2D features
- Capps-NC Surfer – Die & Mold applications:Check 3D sculptured surface parts, surface analysis, cut sections. Perfect for die & molds
- Capps-NC Full Geometric & Tolerancing:Measure any prismatic part with 3D features, cone, cylinder, sphere, and report any GD&T, flatness, true positions, parallelism, perpendicularity, profile & form reports
- Capps-NC RevEng – Reverse Engineering:Scan unknown profiles, generate CAD data and G-Code machine program
Explore ATS
Testimonials
“The post processor we have from ATS works beautifully for our machine.”
- Bryan Stenman
Metalcraft Impression Die, Co
IMTS 2012
McCormick Center Chicago, IL.
9/10/12 - 9/15/12
The Advanced Manufacturing & Technology Show
Dayton Airport Expo Center
10/24/12 - 10/25/12
